WhatsApp: ; Email:
Work
Stainless Steel Sealing Flange for 1″ dia Tube
For any inquiry, please send to this email: sales@gensitherm.com
This is a pair of sealing flange with SS water cool tubing & valve for O.D 1″ diameter processing tube. If you cannot use a ceramic block in two ends of the tube, you must use the water cool tubing to keep flange cool (otherwise silicone o-ring may get damaged)
This is a pair of sealing flange with SS water cool tubing & valve for O.D 1″ diameter processing tube. If you cannot use a ceramic block in two ends of the tube, you must use the water cool tubing to keep flange cool (otherwise silicone o-ring may get damaged)
SPECIFICATIONS
| Features | Made of Stainless Steel with double high-temperature silicon O-rings on the flange.
Stainless steel needle valve with 1/4″ pipe adaptor. The assembly kit will seal 25 – 26 (1″) mm diameter ceramic and quartz tube. Vacuum meter is installed in one side of flange. Our Thermolysis Water Cool System is an ideal tool for supplying cooling water to this flange set. |
| Vacuum level | 10E-2 torr by a mechanical pump
10E-5 torr by a small turbopump and 10-6 torr by hi-speed turbopump |
| Optional part | You may order digital vacuum gauge for precision vacuum control up to 10-4 torr
For CVD application, please choose anti-corrosive vacuum gauge You can choose the various end of fitting as options You may order flange support to avoid tube turning |
| Warning | Must put a refractory tube block in front of the flange to avoid heat radiation melt silicone O-ring.
Please do not over tighten the three hex screws on the flanges to avoid overpressure incidents. The recommended torque is 35~40 inch-lbs. For liability considerations, We does not recommend or endorse the use of any toxic, flammable or corrosive gases with our flange assemblies. Please contact us with any concerns. |
